A chainsaw is the best tool to cut the tree log quickly. It’s a dense and energetic tool that works for high performance. But you have to know a better use system to reduce the wood correctly. Different types of brands do different work. A correct operating system can finish the cutting process as woodcutter want.
Table of Contents
learn how to use a chainsaw
Relevant material and tools kit
Firstly you can select the maintenance tool for operating the chainsaw.
You can read the manual guide book for proper knowledge. Some essential things that are vital to use a chainsaw. Here are some given below-
- Perfect work can be done with a chainsaw.
- Protect sudden damage to wearing a tight, thick cloth.
- To protect eye and ear can use a helmet or a hard type hat.
- Hand gloves needed must.
- For your leg protection, you should wear logging boots that make of steel.
- SAE 30 oil, gas, and chain oil needs to run the chainsaw.
Few Ways to use your chainsaw
Step 1
When you go to cut the tree with a chainsaw, you should know how to operate it. So it’s a great option to read the manual for taking helpful information and you can prevent an uncertain accident.
Step 2
Secondly, you will fill the chainsaw blade with full of oil. SAE 30 oil is perfect for the saw blade. If you can’t select the right oil for your chainsaw, your saw blade will burn and damage. That’s why careful to fill the fat that is not weighted.
Step 3
An electric chainsaw is better for the woodcutter, who is a small person. You plug the cord with the electrical portion.
Step 4
You need to clean the cut area. When you cut, the tree ground side has to very perfectly clean.
Step 5
A chainsaw works a different type of work. You should care of 4 essential things that are-
- Felling: Felling is for cutting the big tree part.
- Limbing: The rest of the limbing and branches can get after cut the big tree.
- Trimming: This is what the cutting limb tree cut or takes off from the trees.
- Bucking: Bucking is the rest of the final cutting log.
Step 6
When everything is ready to cut the tree, you should recheck the chainsaw for perfection.
Step 7
The chainsaw has an Anti-kickback system that protects you from a sudden accident. This option provides you safety.
Step 8
You need to take extra tools like- hammer, wedge, or an ax. That would help you cut the tree without any difficulties.
Step 9
You must have to check your chainsaw carburetor of the premium bulb, air filter, and lubricator for getting the power of the source.
Step 10
After finish the cutting tree, you have to care about cleaning the saw and cool it down for long-lasting use. And for safety, you need to take out all fuel from it.
Sharp the chainsaw
A chainsaw can be used longer for a proper maintenance system. So, chainsaw must need sharpening. Dull chainsaw can’t cut the tree properly. You have to pressure more to cut. However, the most valuable part is flat or blunt chainsaw is not lasting for a long time. Here are some necessary steps to make the sharp chainsaw-
- Firstly you need to hand gloves to hold the chainsaw. Then make sure to activate the brake to lock the chain for sharpening.
- The chainsaw has rivets that sharpen the teeth atomically towards the guide nose bar part.
- Replace the cutter teeth on the top of the plate and you have to check it for proper arranges.
- If you want to proper shiny and silver of chain, then you can use 2 or 3 strokes.
- At the end of finish the sharp of teeth, you remove the chain from the breaking point. Then you begin this part again for sharp teeth that the right way to sharp teeth repeats about three times.
- You can get high depth gauge from the tools of measure in more times. This depth gauge is standing between the cutting teeth.
- For a long time, sharp the process repeat and make sure not junk in the teeth side.
Chainsaw needed care of maintenance:
Use verities of tool to make it for durability. Some maintenance tips are in below-
- Required to operate chainsaw is safely and perfect.
- Necessary to adjust the combo screwdriver “wrench” for tight or loose correction with the tension part. This part of the work does the maintenance of chainsaw.
- You need to clean the bar and tools every day after use because some debris stuck in it and sawdust, tree sap, or spoil oil can damage the chainsaw.
- All clutches cover, and brake parts need to remove from the blades.
- Every time, before use, you must check all tools arrangements for selection.
- The sharp chainsaw provides more smooth work and reduces kickback for the sudden accident. And ensure safety for the woodcutter.
Important Maintenance tool
Without any exceptional device, you can’t start your cutting tree. All heavy-duty base tools keep inside a toolbox for safe storage. All are greatly affected by the maintenance chainsaw. Some tools are-
- All wrenches and screwdrivers used for tight or loose options.
- Includes a round file that is 5/32”, 3/16” and 7/32” Round file and a file gauge.
- A Flat file is 6” that is storage information.
- High depth gauge tool.
- Cleaning cloth to remove dust.
- Also, insert pair of Foam between the Earplugs and Case.
- For selection, it has seen documentation.
Safely operate the chainsaw
Some things are essential to know about running chainsaw. There is a unique option for perfect starting in your goal. A little discussion is I below-
Kickback
At the top of the side of the chainsaw, the bribe is the more important part. These things cause some uncertain accidents. Low payment is safe for work. You should hold the saw tightly and firmly to avoiding dangers. IN modern times all chainsaw has Anti-kickback that provides faster work without any threat.
Pinching
Pinching is a bar that includes in a chainsaw. Most of the tree log is so hard to cut. At that time, it is pinching squeeze the two planks of wood together. And it can prevent the kickback of chainsaw. You can avoid this bar use of several techniques.
Finally, tell you that if you want to operate a chainsaw, you should follow that topic that I mentioned. It will easy to manage your chainsaw.